Small and durable industrial LTE Cat 4 Gateway equipped with a number of Input/Output, Serial, Ethernet ports. Number of features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated in one system.

  • LTE Cat 4 with speeds up to 150 Mbps
  • Configurable Inputs/Outputs for remote monitoring and control
  • GNSS positioning with geofencing functionality
  • RS232/RS485 serial communication interfaces
  • Teltonika Remote Management System compatible
  • Dual SIM ensures internet connectivity if single operator network stops working

MOBILE

Mobile module 4G (LTE) - Cat 1 up to 10 Mbps, 3G - Up to 42 Mbps, 2G - Up to 236.8 kbps
SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail
Status Signal strength, Connected band, SINR, RSRP, RSRQ, Bytes sent/received
Bridge Direct connection (bridge) between mobile ISP and device on LAN
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS (planned), SMS to EMAIL (planned), SMS to HTTP (planned), SMS to SMS (planned), scheduled SMS (planned), SMS autoreply (planned)
Black/White list (planned) Operator black/white list
Multiple PDN (planned) Possibility to use different PDNs for multiple network access and services
Band management Used band status display, Band lock (planned)
APN Auto APN

ETHERNET

LAN 1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

NETWORK

Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned)
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP (planned), SSH, DHCP, Telnet, MQTT (planned), Wake On Lan (WOL) (planned)
VoIP passthrough support (planned) H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
Firewall Port forwards, traffic rules, custom rules
QoS / Smart Queue Management (SQM) (planned) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS (planned) Supported >25 service providers, others can be configured manually
SSHFS (planned) Possibility to mount remote file system via SSH protocol

SECURITY

Authentication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Attack prevention (planned) DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN (planned) Tag based VLAN separation
Mobile quota control Custom data limits for both SIM cards
WEB filter (planned) Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
PPTP, L2TP Client/Server services can run simultaneously
DMVPN (planned) Method of building scalable IPsec VPNs
GRE (planned) GRE tunnel

SERIAL COMMUNICATION MODES

Modes Console, OverIP, Modem (planned), Modbus RTU master, Modbus gateway, NTRIP client (planned)

MODBUS

MODBUS TCP SLAVE

ID filtering Respond to one ID in range [1;255] or any
Allow remote access Allow access through WAN
Custom registers Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality

MODBUS TCP MASTER

Supported functions 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS RTU MASTER

Suported baud rates From 300 to 3000000
Supported functions 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Number of data bits From 7 to 8
Number of stop bits 1 or 2
Parity None, Even, Odd
Flow control None, RTS/CTS (only for RS232 interface), Xon/Xoff

MQTT GATEWAY

Gateway Allows sending commands and receiving data from Modbus Master trough MQTT broker

MODBUS DATA TO SERVER

Protocols HTTP(S), MQTT, Azure MQTT (planned)

MONITORING & MANAGEMENT

WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA Firmware update from sever, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call (planned) Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
TR-069 (planned) OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT (planned) MQTT Broker, MQTT publisher
SNMP (planned) SNMP (v1, v2, v3), SNMP Trap
JSON-RPC Management API over HTTP/HTTPS
Modbus Modbus TCP status/control
RMS Teltonika Remote Management System (RMS)

IoT PLATFORMS

Cloud of Things (planned) Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx (planned) Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity (planned) Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub (planned) Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

SYSTEM CHARACTERISTICS

CPU Qualcomm QCA9531, MIPS 24kc, 650 MHz
RAM 64 MB, DDR2
FLASH memory 16MB SPI Flash (4 MB available for user)

FIRMWARE / CONFIGURATION

WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA Update FW/configuration from server
RMS Update FW/configuration for multiple devices
Keep settings Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

Operating system RutOS (OpenWrt based Linux OS)
Supported languages Busybox shell, Lua, C, C++
Development tools SDK package with build environment provided

LOCATION TRACKING

GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates (planned) GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA NMEA 0183
NTRIP (planned) NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server software (planned) Supported server software TAVL, RMS
Mobile Network Geolocating Location without using GPS, get approximate location based on mobile tower on RMS
Geofencing (planned) Configurable multiple geofence zones

INPUT/OUTPUT

Configurable I/O 3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA
Analog input 1 x Analog input (0 - 30 V)
Events (planned) SMS, Email
Output control HTTP POST/GET, Schedule
I/O juggler (planned) Allows to set certain I/O conditions to initiate event

SERIAL

RS232 Terminal block connector: TX, RX, RTS, CTS
RS485 Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)
Supported baud rates From 300 to 3000000
Number of data bits 7 or 8
Number of stop bits 1 or 2
Parity None, Even, Odd
Flow control None, RTS/CTS (only for RS232 interface), Xon/Xoff

POWER

Connector 2 pins in 16 pin industrial terminal block
Input voltage range 9 - 30 VDC , reverse polarity protection, surge protection +/-1 kV 50μ max
Power consumption Idle: <1.2 W, Max: < 5 W

PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)

Ethernet 1 x RJ45 port, 10/100 Mbps
I/O❜s 3 x Configurable I/O, 1 x Analog input in 16 pin terminal block
Status LEDs 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED
SIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, double stacked SIM tray
Power 2 pins in 16 pin terminal block
Anntenas 1 x SMA connector for LTE, 1 x SMA connector for GNSS
RS232 4 pins in 16 pin terminal block (TX, RX, RTS, CTS)
RS485 4 pins in 16 pin terminal block (D+, D-, R+, R-)
Reset Restore factory settings button

PHYSICAL SPECIFICATIONS

Casing material Aluminium housing with DIN rail mounting option
Dimensions 74 x 83 x 25 mm (L x W x H)
Weight 165 g
Mounting options DIN rail, wall mounting (additional kits needed), flat surface placement

OPERATING ENVIRONMENT

Operating temperature -40°C to 75°C
Operating humidity 10 % to 90 % non-condensing