MOBILE
Mobile module |
4G (LTE) - Cat 1 up to 10 Mbps, 3G - Up to 42 Mbps, 2G - Up to 236.8 kbps |
Bridge |
Direct connection (bridge) between mobile ISP and device on LAN |
Status |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received |
SMS/Call |
SMS status, SMS configuration, Call utilities |
NETWORK
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, SSH, DHCP, MQTT |
Connection monitoring |
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget |
Routing |
Static routing |
Firewall |
Port forwards, traffic rules, custom rules |
DHCP |
Static and dynamic IP allocation |
QoS / Smart Queue Management (SQM) (planned) |
Traffic priority queuing by source/destination, service, protocol or port |
DDNS |
Supported >25 service providers, others can be configured manually |
SECURITY
Authentication |
Pre-shared key, digital certificates, X.509 certificates |
Firewall |
Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T |
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN
OpenVPN |
Multiple clients and a server can run simultaneously, 12 encryption methods |
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec |
IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE |
GRE tunnel |
PPTP, L2TP |
Client/Server services can run simultaneously |
SERIAL COMMUNICATION MODES
Modes |
Console, OverIP, Modem (Full or Partial control), Modbus RTU master, Modbus gateway, NTRIP client |
MODBUS
MODBUS TCP SLAVE
ID filtering |
Respond to one ID in range [1;255] or any |
Allow remote access |
Allow access through WAN |
Custom registers |
Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality |
MODBUS TCP MASTER
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
MODBUS RTU MASTER
Suported baud rates |
From 300 to 115200 |
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
Number of data bits |
From 5 to 8 |
Number of stop bits |
1 or 2 |
Parity |
None, Even, Odd |
Flow control |
None, Xon/Xoff |
MODBUS DATA TO SERVER
MONITORING & MANAGEMENT
WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log |
FOTA |
Firmware update from sever, automatic notification |
SSH |
SSH (v1, v2) |
SMS |
SMS status, SMS configuration |
MQTT |
MQTT Broker, MQTT publisher |
JSON-RPC |
Management API over HTTP/HTTPS |
Modbus |
Modbus TCP status/control |
RMS |
Teltonika Remote Management System (RMS) |
SYSTEM CHARACTERISTICS
CPU |
ARM Cortex-A7 1.2 GHz CPU |
RAM |
128 MB (50 MB available for userspace) |
FLASH memory |
512 MB (200 MB available for userspace) |
FIRMWARE / CONFIGURATION
WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point |
FOTA |
Update FW/configuration from server |
RMS |
Update FW/configuration for multiple devices |
Keep settings |
Update FW without losing current configuration |
FIRMWARE CUSTOMIZATION
Operating system |
RutOS (OpenWrt based Linux OS) |
Supported languages |
Busybox shell, Lua, C, C++ |
Development tools |
SDK package with build environment provided |
INPUT/OUTPUT
Configurable I/O |
2 x Digital Inputs/Outputs |
Events |
SMS status |
POWER
Connector |
4 pin industrial DC power socket |
Input voltage range |
9 - 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max |
Power consumption |
< 5 W |
PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)
RS485 |
RS485 interface, Full Duplex (4 wires) and Half Duplex (2 wires), baud rate 300-115200 |
I/Os |
2 Inputs/Outputs pin on 4 pin power connector |
USB |
Virtual network interface via USB |
Status LEDs |
3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED |
SIM |
1 x SIM slot (Mini SIM -2FF), 1.8 V/3 V |
Power |
4 pin DC connector with 2 x configurable Digital Inputs/Outputs |
Anntenas |
1 x SMA for LTE |
Reset |
Restore factory settings button |
PHYSICAL SPECIFICATIONS
Casing material |
Aluminum housing |
Dimensions |
64.4 x 74.5 x 25 mm (L x W x H) |
Weight |
130 g |
Mounting options |
Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options |
OPERATING ENVIRONMENT
Operating temperature |
-40°C to 75°C |
Operating humidity |
10 % to 90 % non-condensing |
Ingress Protection Rating |
IP30 |
REGULATORY & TYPE APPROVALS
Regulatory |
CE/RED, EAC, RoHS, WEEE |
EMI
Standards |
Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0 |
ESD |
EN 61000-4-2:2009 |
RS |
EN 61000-4-3:2006 + A1:2008 + A2:2010 |
EFT |
EN 61000-4-4:2012 |
Surge protection |
EN 61000-4-5:2014 |
CS |
EN 61000-4-6:2014 |
DIP |
EN 61000-4-11:2004 |
RF
Standards |
EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2 |
SAFETY
Standards |
IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017, EN 50385:2017, EN 62232:2017 |