SWM280 is a powerful L2 managed switch with L3 features for advanced network control. Designed for high-performance connectivity, this 24-port switch combines 12 PoE+ ports, 12 Gigabit Ethernet ports, and 4 SFP ports. The PoE+ supply up to 30 W per port and a total power budget of 300 W. The SWM280 supports PROFINET & other industrial protocols, enabling flexibility over management and power supply.

  • PoE+ Deliver power and data through 12 PoE+ ports with up to 30W per port
  • L2+ Advanced routing protocols & VLAN segmentation
  • Cloud-enabled Shipped with 2 years of RMS Management
  • Protocols Profinet, MRP, and EtherNet/IP for mixed industrial environments

ETHERNET

Total ports 28 ports (24 x Gigabit Ethernet + 4 x SFP)
Gigabit Ethernet ports 24 x 10/100/1000 Mbps RJ45 ports
PoE+ ports 12 x PoE+ ports (IEEE 802.3af/at) - Ports 1-12
SFP ports 4 x Gigabit SFP ports (fiber uplinks)
Standards IEEE 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az
Switch architecture L2 managed switch with L3 features
MAC address table 8K MAC address entries
Switching capacity 56 Gbps (non-blocking)
Packet forwarding rate 83.33 Mpps
Jumbo frame support Up to 10000 bytes

SWITCH FEATURES

VLAN 802.1Q VLAN support, port VLAN separation
QoS Port priority, DSCP priority, 802.1p priority, TOS
Port mirroring Supported
Link aggregation LACP support
IGMP Snooping Supported
Spanning Tree STP / RSTP support
Loop protection Supported
MRP (Media Redundancy Protocol) MRP client role, MRP manager role
Industrial protocols PROFINET (Class B), EtherNet/IP

POWER & POE

Power input 100-240 VAC, 50/60 Hz (internal power supply)
Power connector C14 connector (IEC)
Max power consumption 325 W
PoE standard IEEE 802.3af (PoE) and IEEE 802.3at (PoE+), Alternative A
PoE ports 12 x PoE+ ports (Ports 1-12)
Max PoE power per port 30 W
Total PoE power budget 300 W

MANAGEMENT

Operating system TswOS (based on OpenWrt)
Web management Supported (HTTP/HTTPS)
CLI Supported (Busybox shell)
SNMP SNMP v1/v2c/v3
RMS Teltonika RMS (Remote Management System) support - 2 years included
Firmware upgrade Web GUI, TFTP, RMS
L3 routing features Static IPv4/IPv6 routing, OSPF, BGP, RIP v1/v2, EIGRP
DHCP DHCP server, DHCP client, DHCP static leases

PHYSICAL INTERFACES

Ethernet interfaces 24 x RJ45 Gigabit Ethernet ports (12 PoE+)
Fiber interfaces 4 x SFP slots (1 Gbps)
Status LEDs Power, PoE, Link/Activity, Speed LEDs
Reset button Factory reset button
Grounding Grounding screw

PHYSICAL SPECIFICATIONS

Casing material Metal (industrial aluminum / steel)
Dimensions 19-inch rackmount form factor (1U)
Weight Approximately 2.44 kg
Mounting Rackmount (19-inch)
Cooling Active cooling (internal fans)

OPERATING ENVIRONMENT

Operating temperature 0°C to 50°C
Storage temperature -40°C to 70°C (typical for networking equipment)
Humidity 10% to 90% non-condensing
Ingress protection IP30

REGULATORY & CERTIFICATIONS

EMC certifications CE, FCC, IC
Industrial certifications PROFINET Class B conformance [citation:6]
Environmental compliance RoHS compliant